Description:
1. This siphon pump can quickly and easily transfer fuel, water or other liquids from one container to another.
2.Rubber squeeze pump creates a quick suction to start a siphon.
3.For save and easy removal of liquid from car radiators and fuel tanks.
4.Flexible PVC transparent hose, total length 150/200cm, suitable for and approved for petroleum use.
Pure copper interface, resistant to gasoline and avoid corrosion.

Product parameters
Tube length: 1.5/2m tube (can be freely cut)
Inner diameter: 15mm
Outer diameter: 20mm
Product material: PVC pipe
Scope of application: oil and pumping non-corrosive, non-thick liquid

Usage:
1. Single-handedly took both ends of the pipe, and another hand continuously pinched the black suction air bag,
Say wind blow out head, oil head outlet, and no gas blow out head oil inlet (indicate oil outlet)

2. Put the inlet into the fuel tank and the outlet of the oil tank,
and control the distance between the pipe and the height difference between the plug and outlet;
(The pipe is thin enough to fit most tanks. The pipe is transparent and soft to control the flow)

3. After the procedure must note that just start to smoke when you want to hold the oil outlet,
squeezing suction air pocket in your hand, such as gas suction inlet pipe section full (inlet air A),
oil outlet and gasoline. will follow the artesian tank pipe, basic don't go straight to knead the airbag

Warm Tips:
1. The oil fuel tank of the car must be pumpe
2. There is no oil extraction net filter in the oil tank.
3. Hoses should be put into the mailbox when pumping oil.

Included:
Totally 1 hose, 1 air pump, 2 clamps.
or
just 1 air pump